My Cart
Toggle Nav
Search
or
No products found
Menu
Account
Settings
Language
English

Durcon Color Matched Caulk

Durcon Color Matched Caulk is a 100% siliconized acrylic that is formulated to color match Durcon Epoxy, SPC and Solicor worksurfaces & sinks. 

  • Stain, mold & mildew resistant
  • Stays flexible
  • Easy water clean-up
  • Water-resistant
  • Consumer or professional use
  • Does NOT contain Etylene Glycol

Storage & Shelf Life
Do not allow product to freeze
Close container tightly when not in use & store off thefloor in a well ventilated area
Rotate stock, shelf life expires 18 months frommanufacture date

Available Colors 
The following colors are available in 5.5 oz squeeze tubes 
[enough for 6 linear feet] & 10.5 oz cartridges [12.5 linear feet].

Prep & Directions  
After installation process is completed, including the
application of epoxy adhesive, the worksurface must be
clean, dry and free from dirt, dust, grease, oil, mildew,
wax, loose paint and old caulk. Apply only when caulk, air
and substrate temperatures are above 50°F. Thoroughly
rinse surface and allow to dry completely.

  1. Clip off tip of spout at a 45° angle
  2. Apply caulk using steady, even pressure to completelybridge joints
  3. Smooth caulk using wet finger for a neat appearance
  4. Wipe away excess with a damp cloth beforeit dries
  5. Protect from water until cured for 72 hours,larger beads and cool, humid conditionsmay take longer

Clean skin and equipment with warm water and a mild soap immediately after use.

For Best Results

  • Apply caulk in temperatures between 50°F and 90°F
  • Store caulk in temperatures between 50°F and 90°F
  • Do not use for constant water exposure applications
  • Do not use for joints subject to heavy abrasion or wear
  • Do not attempt to thin caulk
  • For a neat, straight bead edge, mask both sides of joint with masking tape
  • Do not “overtool” the applied caulk, leaving too little caulk to  perform, following cure

Volatile Organic Compounds (VOC)
The use, supply, sale or offer of this product in certain states 
and localities may be prohibited if it exceeds certain VOC 
limits. Please check state and local regulations for any 
prohibitions on the sale and use of this product

Precautionary Information
Refer to product label and material safety data sheet (SDS), 
available under Technical Resources on the Durcon website, 
for Health & Safety information before using this product. 

Warranty
NO WARRANTY: Durcon makes no warranties, express
or implied. No warranty of merchantability or fitness for a 
particular purpose shall apply. The person using the product
(the “User”) is solely responsible for determining whether
the Durcon product is appropriate and/or suitable for
the User’s purpose and method of application. 

LIMITATION AND EXCLUSION OF REMEDIES 
AND DAMAGES: 
The exclusive and sole remedy, and Durcon’s exclusive
and sole obligation, for any defect of this Durcon product
is the refund of the purchase price of the product. 
Durcon shall not, under any circumstances or under any
legal theory, be liable to the Purchaser or any other
person for special, incidental or consequential damages 
of any nature, including without limitation damages to, or 
loss of use of, property, damages for loss of profits or 
revenues or any other damages arising from the 
purchase or use of the product. Durcon’s liability will in 
no event exceed the purchase price of the product.